Complimentary U.S. shipping · No minimum order5–8 business days · 30-day returns

Carbon Collective Microfibre Polishing Compound 500ml

$44.00

  • Carbon Collective · Microfibre Polishing Compound · German Abrasives · US Retailer: Detail Division
  • From tired paint to show finish in a single controlled step.
  • Our Microfibre Polishing Compound uses the latest abrasive technology to cut and refine in a single step.
  • Specifically formulated for use with Microfibre Polishing Pads, this compound can bring life back to the tiredest of paint finishes.
  • Removes oxidation, swirls, and scratches in a single step, cleaning the surface, removing invisible contaminants, and ensuring the best possible surface to apply ceramic coatings.
Free U.S. delivery · No order minimum
Processing: 1–3 business days
Estimated total delivery: 5–8 business days · 30-day returns
SKU: N26C-07-5682EFEF5A4C Category:
A CLOSER LOOK

Product details

Carbon Collective · Microfibre Polishing Compound · German Abrasives · US Retailer: Detail Division
Cut. Refine. Finish.
One Step. One Pass.
German Diminishing Abrasives. Microfibre-Specific Formula. Swirl-Free Results. From tired paint to show finish in a single controlled step.
Our Microfibre Polishing Compound uses the latest abrasive technology to cut and refine in a single step. Specifically formulated for use with Microfibre Polishing Pads, this compound can bring life back to the tiredest of paint finishes.
Using the latest diminishing abrasive technology, the compound breaks down into finer particles during use — allowing you to start with high cutting power and finish with a lower cut, leaving a high gloss swirl-free finish without the need for extra polishes or pads.
Removes oxidation, swirls, and scratches in a single step, cleaning the surface, removing invisible contaminants, and ensuring the best possible surface to apply ceramic coatings.
Abrasive
German
Diminishing technology
Defect Removal
1500 Grit
Up to 1500 grit defects
Size
500ml
Microfibre pad · DA polisher
Start
High Cut
Maximum abrasive power — attacking oxidation, deeper swirls and scratches up to 1500 grit.
Mid Pass
Refining
Abrasives break down as the pad works — transitioning from correction to refinement automatically.
Finish
High Gloss
Fully diminished — leaving a swirl-free, high gloss finish. No follow-up polish or pad swap needed.
"Unlike traditional polishes designed for foam pads, this compound is formulated specifically for microfibre pads — allowing the pad to maintain speed even under load, for a flawless polishing experience."
— Carbon Collective
Key Features
German Diminishing Abrasives Corrects and refines paint in a single controlled step — moving from coarse to fine automatically as the pad works, without requiring a separate finishing polish.
Designed Specifically for Microfibre Pads Not a repurposed foam formula — built from the ground up for microfibre pad dynamics. Maintains pad speed under load and delivers consistent results across the full pass.
Removes Oxidation Ideal for older paint finishes — cuts through oxidation effectively where lighter polishes can't reach, restoring depth and clarity to neglected paint.
Removes Defects up to 1500 Grit Handles the full range of common paint defects in one step — from wet sanding scratches to light swirling and oxidation.
Speed Up Your Workflow Compound clears from microfibre pads in seconds with an air line — no hand washing, no drying time, no downtime between panels.
Perfect Pre-Coating Surface Preparation Removes invisible contaminants and leaves the cleanest possible surface for ceramic coating application. Pairs directly with Concours Ceramic Glaze as a two-step system.
Two-Step System
For the ultimate finish, pair Microfibre Polishing Compound with Concours Ceramic Glaze as a two-step polishing method. Use this compound as step one for correction, then follow with Ceramic Glaze as the final stage to maximise gloss, fill remaining minor imperfections, and add durable SiO2 protection — all without inhibiting any subsequent coating application.
Directions — Shake well before use. Always start with a clean, dirt-free finish.
1
Apply 6 dots onto the microfibre pad, and massage the polish into the pile.
2
Starting on the slowest speed, spread the polish across the panel.
3
Increase the machine speed until the polish starts to turn clear.
4
Using a soft microfibre, remove the polish residue.
5
Repeat the process until the desired finish is achieved.
Pad clean-out is fast. Run an air line through the microfibre pad to clear compound in seconds — no hand washing or drying required. Keep pad speed consistent and results clean throughout the job.
One compound. One pass. Correction and refinement handled. From tired, oxidised paint to a flawless, coating-ready surface — without reaching for a second product.
At a Glance
German diminishing abrasives
Removes defects up to 1500 grit
Cut & refine in one step
Microfibre pad specific formula
Air line pad clean-out · seconds
Pairs with Concours Ceramic Glaze
Polishing images provided by Joey @TintNearMeINC (pro shop)

Product specifications

Materials described by sourceMicrofibre
BrandDetail-Division
MaterialsMicrofibre
Weight0.51 lbs

Choosing, using and caring for your product

Choose tools for the part of the vehicle you are cleaning. Check fabric, pad size and fitting details, and test your cleaning method on an inconspicuous area first.

Read the instructions supplied with your item before first use. Check the components and fitting requirements, and follow the care guidance for the listed materials. Keep the product instructions for future reference.

If a specification is not listed or you need help with a particular application, contact our team before ordering.

Ask us a question ↗

Delivery & FAQs

Where do you deliver?

We deliver within the United States. Standard U.S. shipping is free, with no minimum order amount.

When should I expect my order?

Order processing takes 1–3 business days. Estimated total delivery is 5–8 business days from order placement, including processing and carrier transit. See our Shipping Policy for delivery details and how to contact us about an order.

Can I return an item?

You can request a return within 30 days after delivery. Contact us before returning an item so we can provide the correct instructions. Approved refunds are expected to reach the original payment account within 2–4 business days after approval and issuance. See the Return & Refund Policy for the full conditions.

How do I choose the right option?

Check the product photographs, dimensions, materials and available options. Choose your color, size or specification before adding the item to your cart. If you are unsure, ask our team before ordering.

How can I contact you?

Use the email address or telephone listed in our footer and on the Contact Us page. Include the product name or order number when you need help.